
Problem Possible cause Solution
Malfunction:
The dishwasher
will not drain.
The connection of the water
drain hose is not correct. The
hose can be kinked or squashed.
Make sure that the connection is
correct.
• Continuous flash
of the start/can-
cel indicator
light.
• 3 flashes of the
end indicator
light.
Malfunction:
The anti-flood de-
vice operates.
Close the water tap and contact your local After Sales Service.
Malfunction:
The programme
does not start.
The appliance door is not closed. Close the door.
Mains plug is not connected in. Put in the mains.
The fuse has blown out in the
household fuse box.
Replace the fuse.
After the check, switch on the appliance. The programme continues from the point of inter-
ruption. If the malfunction shows again, contact your After Sales Service.
When the cleaning results are not satisfactory:
Problem Possible cause Solution
The dishes are
not clean
The selected washing programme
is not applicable for the type of
load and soil.
Set different washing programme.
The baskets are loaded incorrectly
so that water cannot reach all sur-
faces.
Load the baskets correctly.
Spray arms do not turn freely be-
cause of incorrect arrangement of
the load.
Make sure that the cutlery and
dishes do not block the spray arms.
The filters are dirty or not correctly
installed.
Make sure that the filters are clean
and installed correctly.
The quantity of detergent is too lit-
tle or missing.
Make sure that the quantity of de-
tergent in detergent dispenser is
correct.
Limescales
particles on
the dishes
The salt container is empty. Fill the salt container with salt.
The water softener is adjusted on a
wrong level.
Set the water softener.
The salt container cap is not closed
correctly.
Make sure that the salt container is
closed correctly.
ENGLISH 16
Commenti su questo manuale